一、根據風機的進出口徑定制同截面的排煙管，方可保證設備的處理效果及設備的經濟運行。
1、 According to the inlet and outlet diameter of the fan, the smoke exhaust pipe with the same section can be customized to ensure the treatment effect and economic operation of the equipment.
二、廚房蒸汽散熱管路與廚房油煙機排煙管分別安裝。
2、 The kitchen steam heat dissipation pipeline and the smoke exhaust pipe of the kitchen range hood shall be installed respectively.
三、廚房排煙管彎頭的額曲率半徑：
3、 Radius of curvature of elbow of kitchen smoke exhaust pipe:
因?yàn)閺濐^的曲率半徑小將增加風管阻力，故一般選擇彎頭曲率半徑為1.5D較為合適，在設置彎頭處應預先留下彎頭的擺放空間及安裝操作空間。
Because the small radius of curvature of the elbow will increase the resistance of the air duct, it is generally appropriate to choose the radius of curvature of the elbow as 1.5D. The placement space and installation operation space of the elbow should be reserved in advance at the place where the elbow is set.
四、安裝預留空間：
4、 Space reserved for installation:
油煙凈化器的安裝位置在電控箱一側1.5米左右的空間作為油煙凈化器維修、維護的空間。
The installation position of the oil fume purifier is about 1.5m on one side of the electric cabinet as the space for the repair and maintenance of the oil fume purifier.
The above is the knowledge brought to you today. Jinan hotel kitchen smoke hood has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.xyphw.com
上一篇：通風管道的功能與常見的形狀有哪些？
下一篇：通風管道安裝風管應該如何相連
